Comtech EF Data CDM-IP 300L - Manual (Page 215)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
189
Menu Options/Fields Entry Description
WAN Rx HDLC Payload
Count The count of payload bytes that were received over
satellite link excluding any frame overhead.
WAN Rx HDLC Header
Count The count of HDLC header bytes received over
satellite link including control, HDLC address, Flow ID,
and CRC.
WAN Rx HDLC Packet
Count
Number of packets received over satellite link.
WAN Rx Err Invalid Flow Id
Number of packets which the flow identifier has been
corrupted, does not fall into the range of acceptable
values.
WAN Rx Err SAR
Reassemble
Number of packets unable to correctly reassemble a
segmented packet.
WAN Rx Err Hdr Decomp
Number of packets unable to correctly decompress the
header information.
WAN Rx Err Mem Alignment
Number of packets discarded (caused by memory
corruption).
WAN Rx Err bad CRC
Number of corrupted packets indicated by CRC check.
WAN Tx HDLC Header
Count This counter keeps track of number of HDLC header
bytes transmitted over satellite link.
WAN Tx HDLC Payload
Count Number of payload bytes transmitted over satellite link.
WAN Tx HDLC Packet
Count Count of packets transmitted over satellite link.
Ethernet traffic destined to
go over WAN (kbps) Bandwidth required to forward Ethernet traffic before
compression.
Actual Satellite traffic (kbps) Current satellite bandwidth being used.
Percentage of WAN
Bandwidth saved Displays percent of bandwidth being saved as a result
of Header and/or Payload Compression, and optimized
satellite framing.
Clear C Resets all WAN statistics.
Save Parameters S This option allows a user to save the current
configuration of the CDM-IP to permanent storage.
This configuration will be restored on each successive
power cycle of the CDM-IP.
Exit X This option allows a user to exit the current menu and
return to its parent menu.