Comtech EF Data CDM-IP 300L - Manual (Page 272)

CDM-IP 300L IP-Centric Satellite Modem Rev. 1
CD/CDMIP300L.IOM
246
OID Description
cdmipQoSRulesRowStatus Used in GET operations to tell if the
Route table entry is active. It is used
in SET operations to tell if a new
QoS Rule table entry is to be
created or an existing QoS Rule
table entry is to be deleted.
It returns 1 (active) to indicate that
the QoS Rule entry is available for
use by the managed device. The
values of 2 (notInService) and 3
(notReady) are not supported.
When a new route is created, this
OID must be set to 4
(createAndGo). The value of 5
(createAndWait) is not supported.
If an existing row is to be deleted
this OID must be set to 6 (destroy),
which indicates that the user wishes
to delete the QoS Rule from the
QoS Rule table.
The “cdmipIPRouteRowStatus” can
return
1 Active
The “cdmipQoSRulesRowStatus”
can be set to the following for row
create/delete:
4 Create And Go
6 Destroy
cdmipQoSDiffServeRulesEntry QoS Rule Name
cdmipQoSDiffServeRulesMinBw QoS DiffServ Rule Minimum
Bandwidth
cdmipQoSDiffServeRulesMaxBw QoS DiffServ Rule Maximum
Bandwidth
cdmipQoSDiffServRulesPriority QoS DiffServ Rule
cdmipQoSMode QoS Mode
Max/Priority
Min/Max
DiffServ