Niveo Professional NGSME16T2H - Manual (Page 131)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 131
QI
Query Interval. The Query Interval is the interval between General Queries sent by
the Querier. The allowed range is 1 to 31744 seconds, default query interval is 125
seconds.
QRI
Query Response Interval. The Max Response Time used to calculate the Max Resp
Code inserted into the periodic General Queries. The allowed range is 0 to 31744
in tenths of seconds, default query response interval is 100 in tenths of seconds (10
seconds).
LLQI (LMQI for IGMP)
Last Member Query Interval. The Last Member Query Time is the time value
represented by the Last Member Query Interval, multiplied by the Last Member
Query Count. The allowed range is 0 to 31744 in tenths of seconds, default last
member query interval is 10 in tenths of seconds (1 second).
URI
Unsolicited Report Interval. The Unsolicited Report Interval is the time between
repetitions of a host's initial report of membership in a group. The allowed range is 0
to 31744 seconds, default unsolicited report interval is 1 second.
Buttons
Refresh: Refreshes the displayed table starting from the “VLAN” input fields.
<<: Updates the table starting from the first entry in the VALN Table, i.e. the entry
with the lowest VLAND ID.
>>: Update the table, staring with the entry after the last entry currently displayed.
Save: To save the configuration.
Reset: Click to undo any changes made locally and revert to previously saved
values.