Niveo Professional NGSME16T2H - Manual (Page 136)

Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 136
QRI
Query Response Interval. The Maximum Response Delay used to calculate the
Maximum Response Code inserted into the periodic General Queries. The allowed
range is 0 to 31744 in tenths of seconds, default query response interval is 100 in
tenths of seconds (10 seconds).
LLQI
Last Listener Query Interval. The Last Listener Query Interval is the Maximum
Response Delay used to calculate the Maximum Response Code inserted into
Multicast Address Specific Queries sent in response to Version 1 Multicast Listener
Done messages. It is also the Maximum Response Delay used to calculate the
Maximum Response Code inserted into Multicast Address and Source Specific
Query messages. The allowed range is 0 to 31744 in tenths of seconds, default last
listener query interval is 10 in tenths of seconds (1 second).
URI
Unsolicited Report Interval. The Unsolicited Report Interval is the time between
repetitions of a node's initial report of interest in a multicast address. The allowed
range is 0 to 31744 seconds, default unsolicited report interval is 1 second.
Buttons
Refresh: Refreshes the displayed table starting from the “VLAN” input fields.
<<: Updates the table starting from the first entry in the VALN Table, i.e. the entry
with the lowest VLAND ID.
>>: Update the table, staring with the entry after the last entry currently displayed.