Niveo Professional NGSME16T2H - Manual (Page 234)

Chapter 4: Feature Configuration - CLI
Featuring Configuration
– CLI
NGSME16T2H User Manual | 234
( Valid values are in the range 6 to 40 seconds, and MaxAge must be
<= (FwdDelay-1)*2. )
Maximum Hop Count
Syntax:
STP MaxHops [<maxhops>]
( Valid values are in the range 6 to 40 hops)
Transmit Hold Count
Syntax:
STP Txhold [<holdcount>]
( Valid values are in the range 1 to 10 BPDU's per second.)
Advanced Setting
Syntax:
STP bpduFilter [enable|disable]
STP bpduGuard [enable|disable]
STP recovery [<timeout>]
( After recovery timeout time is set, the recovery is enabled
automatically.)
MSTI Mapping
MSTI/VLAN Mapping
Syntax:
STP Msti Add <msti> <vid-range>
Example:
STP>mst add 1 100
Add VLAN 100 to MSTI1
STP>mst map
MSTI VLANs mapped to MSTI
---- --------------------
MSTI1 100
MSTI2 No VLANs mapped
MSTI3 No VLANs mapped
MSTI4 No VLANs mapped
MSTI5 No VLANs mapped