Kyocera Ecosys m2040dn - Manual (Page 49)

Basic
Printer Driver 5-2
The Page Sizes dialog box displays the unit of measurement in inches or
millimeters. You can change the Units setting in the User Settings dialog box,
accessed from Device Settings.
Creating a Custom Page Size
1 In the Basic tab, click Page Sizes.
2 In the Page Sizes dialog box, click New.
3 A default custom name appears in the Name box. Type a name for your custom
page size.
4 Type or select values for the short edge and long edge. If a typed value exceeds
the allowable limit, it automatically adjusts to the limit.
5 When finished, click Save.
6 Click OK to close the Page Sizes dialog box.
The custom page size appears in the Print size list, which is used for enlarging
and reducing the sizes of prints.
Deleting a Custom Page Size
1 In the Basic tab, click Page Sizes.
2 In the Page Sizes dialog box, select the custom size to delete.
3 Click Delete.
4 Click OK to close the Page Sizes dialog box.
Printing with Custom Size Pages
1 Load custom-sized paper into the Multipurpose tray.
2 In the Basic tab, select the name of your custom page size in the Print size list.
3 Click OK to return to the Print dialog box.
4 Click OK to start printing.
Media Type
Media type instructs the printer to search for the type of media that is requested
by the application or the printer driver. The choices shown may change
depending on the selection in Source. The default is Unspecified and if
selected, the driver does not switch to another source tray if the selected tray is