Printing carbon copies, Collate, Printing collated documents – Kyocera Ecosys m2040dn User Manual
Page 51: Collate -2, Printing carbon copies -4, Collate -4, Printing collated documents -4
Basic
Printer Driver
5-4
1
In the Basic tab, select a source and number of copies for the original copy.
2
For each carbon copy, load the desired media types or colored paper into
additional paper sources.
3
Select the Carbon copies check box.
4
Click Settings.
5
In the Carbon Copy Settings dialog box, select the number of copies for each
source.
The total number of copies for all sources is displayed under Total.
6
Select a Source or Media type or both for each carbon copy.
7
Click OK to return to the Print dialog box.
8
Click OK to start printing.
Collate specifies the order in which the pages of a multiple copy job are printed.
Click the icons to change between on and off.
With On selected, the first time the print job is sent to the printing system the
data is rendered as page images in the printing system's memory. The
remaining job copies are printed from the stored data. This avoids the extra
processing involved in sending every copy from the computer to the printing
system.
With On selected, the driver prints the complete job set by set (123, 123). With
Off selected, it prints each page by set (111, 222). For example, with On
selected, three copies of a five-page document outputs as pages one through
five in succession, three times.
The printer driver automatically overrides the application's Collate setting and
uses the printer driver setting. You can use the application's Collate setting by
clearing the Ignore application collation check box in the Compatibility
Settings dialog box accessed from Device Settings.
1
In the Basic tab, click the Collate icons to change between on and off.
2
Type or select the number of complete sets of the print job in the Copies box.
3
Click OK to return to the Print dialog box.
4
Click OK to start printing.