Lanier LD 035 - Manual (Page 110)

Accessing User Tools (Copier/Document Server Features)
95
4
❖ ❖ ❖ ❖ Priority Setting: Reduce
You can set the ratio with priority
when [Reduce/Enlarge] is pressed,
followed by [Reduce].
Note
❒ Default:
• Metric version: 71%
• Inch version: 73%
❖ ❖ ❖ ❖ Ratio for Create Margin
You can set a Reduce/Enlarge ra-
tio when registering Create Mar-
gin in a shortcut key.
Note
❒ Default: 93%
❖ ❖ ❖ ❖ R/E Priority
Specifies which tab is given priori-
ty on the display panel when [Re-
duce/Enlarge]
is pressed.
Note
❒ Default: Reduce
Edit 1 /
2
Note
❒ Enter the width of the binding
margin with the number keys as
follows:
• Metric version: 0–30 mm (in 1
mm steps)
• Inch version: 0"–1.2" (in 0.1 inch
steps)
❒ Enter the width of the erased mar-
gin with the number keys as fol-
lows:
• Metric version: 2–99 mm (in 1
mm steps)
• Inch version: 0.1"–3.9" (in 0.1
inch steps)
❖ ❖ ❖ ❖ Front Margin: Left/Right
You can specify left and right mar-
gins on the front side of copies in
Margin Adjust mode.
Note
❒ Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2"
❖ ❖ ❖ ❖ Back Margin: Left/Right
You can specify left and right mar-
gins on the back side of copies in
Margin Adjust mode.
Note
❒ Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
❖ ❖ ❖ ❖ Front Margin: Top/Bottom
You can specify top and bottom
margins on the front side of copies
in Margin Adjust mode.
Note
❒ Default:
• Metric version: Top/Bottom 0
mm
• Inch version: Top/Bottom 0.0"
❖ ❖ ❖ ❖ Back Margin: Top/Bottom
You can specify top and bottom
margins on the back side of copies
in Margin Adjust mode.
Note
❒ Default:
• Metric version: Top/Bottom 0
mm
• Inch version: Top/Bottom 0.0"
❖ ❖ ❖ ❖ 1 Sided→ → → →2 Sided Auto Margin: TtoT
In 1 sided → 2 sided Duplex mode,
you can specify the margins on the
back side.
The margin is set to the same value
of “Back Margin: Left/Right”.
AdonisC3_GBcopyF_FM1.book Page 95 Thursday, November 28, 2002 1:53 PM