Lanier LD 035 - Manual (Page 48)

Copier Functions
33
2
BBBB
Enter the number of copy sets
with the number keys.
Note
❒ To confirm the type of finishing,
press the
{{{{Sample Copy}}}} key. See
p.33 “Sample copy”.
CCCC
Place your originals.
Note
❒ When placing an original on the
exposure glass, start with the
first page to be copied. When
placing an original in the ADF,
set so the first page is on the top.
❒ When placing an original on the
exposure glass or in the ADF us-
ing Batch mode, press the
{{{{#}}}}
key after all the originals have
been scanned.
DDDD
Press the
{{{{Start}}}} key.
Sample copy
Use this function to check the copy
settings before making a long copy
run.
Note
❒ This function can be used only
when the Sort function is turned
on.
AAAA
Select Sort and any other neces-
sary functions, and then place the
originals.
BBBB
Press the
{{{{Sample Copy}}}} key.
One copy set is delivered as a sam-
ple.
CCCC
If the sample is acceptable, press
[Print]
.
The number of copies made is the
number specified, minus one for
the proof copy.
Note
❒ If you press [Suspend] after
checking the results, return to
step
A to adjust the copy set-
tings as necessary. You can
change the settings for Staple,
Duplex (one-sided
→ one-sid-
ed, one-sided
→ two-sided),
Copy Orientation, Margin Ad-
just., and Cover/Slip Sheet.
However, depending on the
combination of functions, you
may not be able to change some
settings.
AdonisC3_GBcopyF_FM1.book Page 33 Thursday, November 28, 2002 1:53 PM