Lanier LD 035 - Manual (Page 77)

Copying
62
2
Reference
Related initial settings
p.99 “Stamp Position 1 - 4”
p.99 “Stamp Format 1 - 4”
AAAA
Press [Edit/Stamp].
BBBB
Press [Stamp].
CCCC
Press [User Stamp].
DDDD
Select the stamp you require.
EEEE
Press [All Pages] or [1st Page only] to
select the print page.
Note
❒ You can change the stamp posi-
tion. See p.62 “To change the
stamp position”.
FFFF
After making all settings, press
[OK]
.
GGGG
Press [OK].
HHHH
Place the original, and then press
the
{{{{Start}}}} key.
To change the stamp position
AAAA
Press [Change].
BBBB
Select the desired position, and
then press [OK].
To program the user stamp
Note
❒ The range of stamp images for
readability is 10–297 mm high
(0.4"–11.7") and 10–432 mm (0.4"–
17") wide. However, if the value
exceeds the maximum value of the
area (5,000 mm
2 , 7.75 inch 2 ), it is
corrected within the range of the
area automatically.
❒ Up to four images that you use fre-
quently can be stored in the ma-
chine's memory.
AAAA
Make sure that the machine is in
copier mode.
BBBB
Press the
{{{{User Tools/Counter}}}} key.
CCCC
Press [Copier/Document Server Fea-
tures]
.
DDDD
Press [Stamp].
EEEE
Press [User Stamp].
AdonisC3_GBcopyF_FM1.book Page 62 Thursday, November 28, 2002 1:53 PM