Lanier LD 035 - Manual (Page 30)

15
2. Copying
Basic Procedure
AAAA
When the machine is set for user
codes, enter a user code (up to 8
digits) with the number keys, and
then press the
{{{{#}}}} key.
The machine is ready to copy.
Reference
For users codes, see “Key Oper-
ator Tools”, General Settings
Guide.
BBBB
Make sure that " d d d dReady" is
shown on the display.
If any other function is displayed,
press the
{{{{Copy}}}} key.
❖ ❖ ❖ ❖ Initial copy display
CCCC
Make sure that there are no previ-
ous settings remaining.
Note
❒ When there are previous set-
tings remaining, press the
{{{{Re-
set
}}}} key and enter again.
DDDD
Place your originals.
Reference
p.10 “Placing Originals”
EEEE
Set your desired settings.
Reference
Please refer to each function.
FFFF
Enter the required number of cop-
ies with the number keys.
Note
❒ The maximum copy quantity
that can be set is 999.
GGGG
Press the
{{{{Start}}}} key.
The machine starts copying.
Note
❒ When placing originals on the
exposure glass, press the {{{{#}}}}
k e y a f t e r a l l o r i g i n a l s a r e
scanned.
❒ Copies are delivered face down.
- - - -How to operate
❖ ❖ ❖ ❖ To stop the machine during a multi-
copy run.
Press the
{{{{Clear/Stop}}}} key.
❖ ❖ ❖ ❖ To return the machine to the initial
condition after copying.
Press the
{{{{Clear Modes}}}} key.
❖ ❖ ❖ ❖ When clearing entered values.
Press the
{{{{Clear/Stop}}}} key or [Clear]
on the display.
❖ ❖ ❖ ❖ To check the settings.
Press the
{{{{Check Modes}}}} key.
AdonisC3_GBcopyF_FM1.book Page 15 Thursday, November 28, 2002 1:53 PM