Lanier LD 035 - Manual (Page 49)

Copying
34
2
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒ This function can only be used
when the Sort function is turned
on.
AAAA
While "Copying" is displayed,
press the
{{{{Clear/Stop}}}} key.
BBBB
Press [Change Quantity].
CCCC
Enter the number of copy sets
with the number keys, and then
press the
{{{{#}}}} key.
Note
❒ The number of sets you can en-
ter differs depending on when
the
{{{{Clear/Stop}}}} key is pressed.
DDDD
Press [Continue].
Copying starts again.
Stack
Copies can be assembled with each
page placed.
• 1000-Sheet finisher (optional)
Each time the copies of one set or
those of each job are delivered, the
next copy is shifted when deliv-
ered so you can separate each set
or job.
• 2 Tray finisher (optional)
The shift tray moves backward or
forward each time the copies of
one set or those of each job are de-
livered, causing the next copy to
shift when delivered so that you
can differentiate each set or job.
• Booklet finisher (optional)
Each time a set of copies or a job is
delivered, the finisher shift tray
moves backward or forward ,
causing the top sheet of each set to
shift when delivered, separating
each set or job.
2
1
3
3 3 3
22
2
11
1
2
1
3
GCANSO1E
AdonisC3_GBcopyF_FM1.book Page 34 Thursday, November 28, 2002 1:53 PM