Lanier LD 035 - Manual (Page 123)

Specifications
108
5
❖ ❖ ❖ ❖ Staple
• The following type of paper cannot be stapled:
• Translucent paper
• OHP transparencies
• Label paper (adhesive labels)
• Thick paper
• Curled paper
• Paper of low stiffness
• Paper of mixed sizes
• In the following cases, copies will be delivered to the shift tray without sta-
pling:
• When the number of sheets for one set is over stapler capacity.
• When memory reaches 0% during copying.
• When using Double Copies, or [1 Sided → 1 Sided], [1 Sided → 2 Sided], [2
Sided
→ 1 Sided], or [2 Sided → 2 Sided] in Combine mode, select K paper
for L original and L paper for K original.
• When using Double Copies, or [1 Sided 2 Pages
→ 1 Sided Combine] and
[1 Sided 4 Pages
→ 2 Sided Combine] in Combine mode, select K paper for
L original and L paper for K original.
• When using [Left 2] or [Top 2] with Double Copies, or [1 Sided
→ 1 Sided],
[1 Sided → 2 Sided], [2 Sided → 1 Sided], or [2 Sided → 2 Sided] in Com-
bine mode, select K paper for L original and L paper for K original.
• When the booklet finisher is installed, even if you place different size orig-
inals in the ADF, appropriate size of copy paper can be automatically se-
lected and stapled using the Mixed Size mode and Auto Paper Select
function. Load the paper you want to use in the paper trays beforehand.
Paper sizes that can be stapled when using the Mixed Size mode are as fol-
lows:
• A3
L and A4K
• B4 JIS L and B5 JISK
• 11"
× 17"L and 8 1 /
2
"
× 11"K
AdonisC3_GBcopyF_FM1.book Page 108 Thursday, November 28, 2002 1:53 PM