Lanier LD 035 - Manual (Page 43)

Copying
28
2
Auto Reduce/Enlarge
The machine can choose an appropri-
ate reproduction ratio based on the
paper and original sizes you select.
Note
❒ You cannot use the bypass tray
with this function.
❒ When using Auto Reduce/Enlarge,
see the following table for original
sizes and orientations you can use:
❖ ❖ ❖ ❖ Metric version
❖ ❖ ❖ ❖ Inch version
Reference
p.9 “Sizes difficult to detect”
AAAA
Press [Auto Reduce/Enlarge].
BBBB
Select the paper tray.
CCCC
Place the original, and then press
the
{{{{Start}}}} key.
Size Magnification
This function calculates an enlarge-
ment or reduction ratio based on the
lengths of the original and copy.
Note
❒ Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
AAAA
Press [Reduce/Enlarge] .
Where original is
placed Original size and
orientation
Exposure glass A3 L, B4 JISL,
A4 KL, B5 JISKL
Auto Document
Feeder A3 L, B4 JISL,
A4 KL, B5 JISKL,
A5 KL, B6 JISKL,
11” × 17”L, 8 1 /
2
" ×
11" KL
Where original is
placed Original size and
orientation
Exposure glass 11" × 17"L, 8 1 /
2
" ×
14" L, 8 1 /
2
" × 11KL
Auto Document
Feeder A4 LK, 11" ×
17" L, 8 1 /
2
"
× 14"L,
8 1 /
2
" × 11"KL,
5 1 /
2
" × 8 1 /
2
" KL
Amm amm
AdonisC3_GBcopyF_FM1.book Page 28 Thursday, November 28, 2002 1:53 PM