Directional size magnification (mm) – Lanier LD 035 User Manual
Page 45
Copying
30
2
D Enter the desired ratio with the
number keys, followed by [#].
E Press [OK].
To specify a ratio with [
n
n
n
n] and
[
o
o
o
o]
A Press [With n
n
n
no
o
o
o].
B Press [Horizontal].
C Adjust the ratio using [n
n
n
n] or
[
o
o
o
o].
Note
❒ Pressing [n
n
n
n] or [o
o
o
o] changes
the ratio in increments of 1%.
Pressing and holding down
[
n
n
n
n] or [o
o
o
o] changes it in in-
crements of 10%.
❒ If you have incorrectly en-
tered the ratio, readjust the
ratio with [
n
n
n
n] or [o
o
o
o].
D Press [Vertical].
E Adjust the ratio with [n
n
n
n] or
[
o
o
o
o].
F Press [OK].
DDDD
Press [OK].
EEEE
Place your originals, and then
press the
{{{{Start}}}} key.
Directional Size Magnification
(mm)
The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Note
❒ Specify the vertical and horizontal
sizes of the original and those of
the copy, as shown.
❒ You can enter sizes within the fol-
lowing ranges:
Metric
version
Vertical: 1–999 mm (in incre-
ments of 1 mm)
Horizontal: 1–999 mm (in in-
crements of 1 mm)
Inch
version
0.1"–99.9" (in increments of
0.1")
1
3
2
4
CP2M01EE
AdonisC3_GBcopyF_FM1.book Page 30 Thursday, November 28, 2002 1:53 PM