Lucent Technologies INTUITY Voice/FAX Messaging - Manual (Page 21)

15
Setting Addressing Options
Before moving into the “Creating a Message” category, it is necessary to
determine whether messages will be recorded first or addressed first.
The options are address before record (ABR) on or address before record off.
Once set, addressing can be left in the selected option with no further action
by the user, or modified according to individual requirements.
NOTE:
In fax-messaging mode, the system uses your active phone line to send
the fax, then hangs up when transmission is complete. Thus, you must
address a fax before you send it. It is recommended that you elect ABR
on.
To change the ABR setting:
1. Press (Personal Mailbox Options) from the Activity Menu.
2. Press . You hear the prompt, “Address before record turned on”
(or “off”).
3. Press to change ABR setting.
Selecting Delivery Options
When you have created/addressed your message, and have moved to
sending faxes or creating and sending voice or voice-fax messages, several
delivery options are available.
Press to listen to the list of options:
Make your message private. (Press again to undo.)
Make your message priority (if available). (Press again to undo.)
Schedule delivery. (Press again to undo.)
5
6
1
0
1 1
2 2
3 3