Lexicon 570 - Manual (Page 17)

12
Dancer Communications, Inc.
Operation
Reports
The Messenger 570 generates a variety of concise text reports. Each report is updated just prior to generation and is
time-stamped. An auto-report feature, when enabled, produces an input report at the beginning of each
communications session without the need to enter a pass code. Reports can be accessed by any security level.
„ Input Report
To get a real-time report of the present condition of the eight inputs, including any that may have exceeded an
alarm set-point, type INP R at the command prompt.
Analog inputs will provide LO, HI, and OK status; discrete will provide AL and OK indicators.
COMMAND >INP R
INPUT STATUS REPORT
===== ====== ======
Outside Air OK -82 F
Input #2 OK -66 F
Input #3 OK -83 F
Input #4 OK -85 F
Input #5 OK -85 F
Input #6 OK -85 F
Input #7 OK -85 F
Input #8 OK -85 F
Time: 08/03/96 11:12:36
„ Output Report
To get a report of the present condition of the four outputs, type OUT R at the command prompt.
COMMAND>OUT R
OUTPUT STATUS REPORT
====== ====== ======
Heater Manual OFF
Output #2 Manual ON
Output #3 Manual ON
Output #4 Manual ON
Time: 08/03/96 11:13:11
COMMAND>