Lexicon 570 - Manual (Page 18)

13
www.remotepossibilities.com
„ Alarm Report
To get a report of all alarms, including those that have not yet been acknowledged, type ALM R at the
command prompt.
COMMAND>ALM R
ACTIVE ACKNOWLEDGED ALARMS
====== ============ ======
None
UNACKNOWLEDGED ALARMS
============== ======
None
Alarm report. The Messenger 570 system will report all alarms and give you the option to acknowledge any
unacknowledged alarms.
„ Phone Directory Report
To get a report of the designated dial-out phone names and numbers, type PHO R at the command prompt.
COMMAND>PHO R
PHONE NUMBER REPORT
===== ====== ======
1 - Phone #1 No Number
2 - Phone #2 No Number
3 - Phone #3 No Number
4 - Phone #4 No Number
5 - Phone #5 No Number
6 - Phone #6 No Number
7 - Phone #7 No Number
8 - Phone #8 No Number
„ Security Report
To get a report of various system counters and timers, type SEC R at the command prompt.
Note: These counters and timers are non-volatile and will be retained even if all power is removed from the
Messenger 570 system.
COMMAND>SEC R
SECURITY REPORT
======== ======
Total Alarms: 0
Access Denials: 2
On-line Sessions: 11
Service Outages: 14
System Hours: 8.8