Lexicon 570 - Manual (Page 28)

23
www.remotepossibilities.com
Command Reference
To Messenger 570 remote monitoring system contains many features and
functions that can save you both time and money. An understanding of the
commands described in this section will help you maximize the return on your
remote monitoring investment.
The commands in this reference are listed in alphabetical order.
ALM (Alarm Commands)
These commands configure the Messenger 570 system to continually monitors all inputs for alarm conditions. If a
set-point has been exceeded for a designated period of response time, the Messenger 570 system recognizes this as
the existence of an alarm condition.
„ Help with the ALM command
Type ALM at the command prompt and the Messenger 570 system will return a list of valid alarm commands
and related instructions.
COMMAND>ALM
ALARM FUNCTIONS
===== =========
ALM R Alarm Report
ALM S Set/Check Alarm Settings
„ Alarm Reports
Type ALM R at the command prompt and the Messenger 570 system will generate an alarm status report.
COMMAND>ALM R
ACTIVE ACKNOWLEDGED ALARMS
====== ============ ======
None
UNACKNOWLEDGED ALARMS
============== ======
None