Lexicon 570 - Manual (Page 35)

30
Dancer Communications, Inc.
0 = Previous Menu
Choose a Number>2
SET/CHECK CRITICAL CONDITION THRESHOLD
========= ======== ========= =========
The critical condition threshold is used to indicate when
a critical condition exists. When the number of critical
input channels, in the alarm state, meets or exceeds the
critical condition threshold, a critical condition event
is triggered.
Current Value: 4
Change present state? [y/n]>y
Enter new value (1 - n) > 4
COMMAND> CRT S
SET/CHECK CRITICAL INPUT SETTINGS
========= ======== ===== ========
1 = Set/Check Critical Input Channels
2 = Set/Check Critical Condition Threshold
3 = Set/Check Critical Condition Actions
0 = Previous Menu
Choose a Number>3
SET/CHECK CRITICAL CONDITION ACTIONS
========= ======== ========= =======
1 = Freeze Secondary Logger
Disabled
0 = Previous Menu
„ CRT R - Critical Condition Report
COMMAND> CRT R
CRITICAL CONDITION REPORT
======== ========= ======
Critical Condition Status:
No critical condition exists.
[An active critical condition exists.]
[An inactive critical condition exists.]
Critical channels in an active alarm state: 12
Critical condition threshold: 5
Critical Condition Actions Status
Periodic Log: Logging Pre-trigger Data [Post-
trigger data][Frozen]
Diagnostics log: Logging Pre-trigger Data [Post-
trigger data][Frozen]