Lexicon 570 - Manual (Page 57)

52
Dancer Communications, Inc.
COMMAND>OUT S
SET/CHECK OUTPUT SETTINGS
========= ====== ========
1 = Output #1 Heater
2 = Output #2 <Label>
3 = Output #3 <Label>
3 = Output #3 <Label>
0 = Previous Menu
Choose a Number>1
Output #1
PRESENT SETTINGS
======= ========
1 = Label <Label>
2 = On Time per Minute 60
3 = Control Mode Manual
4 = Power-up State OFF
5 = Alarm Mask FF
0 = Previous Menu
Choose a Number>3
AVAILABLE CHOICES
-----------------
1 = Manual
2 = Automatic
3 = Automatic Day
4 = Automatic Night
5 = Close on Present Alarms
6 = Open on Present Alarms
7 = Close on Unacknowledged Alarms
0 = Previous Menu
Choose a Number>2
Power-up State
By default, all outputs are off after a power-up reset. By changing the Power-up State setting to On, you
can have an output turn on immediately after a reset.
Alarm Mask
See Controlling Outputs for description of control modes.
PHO (Telephone Dialing Directory)
The PHO commands configure the Messenger 570 system to deliver alarm messages to up to eight people, pagers,
computers or facsimile machines.