Polycom SpectraLink 1725-36028-001 - Manual (Page 65)

SpectraLink 8000 Telephony Gateway Configuration
Reset the SpectraLink 8000 Telephony
Gateway
Note that resetting the SpectraLink 8000 Telephony Gateway(s) will
terminate any calls in progress on the SpectraLink 8000 Telephony
Gateway(s) being reset.
All SpectraLink 8000 Telephony Gateways should be reset at the
end of any maintenance procedure that requires any one
SpectraLink 8000 Telephony Gateway to be reset either via
Maintenance Lock or manually via Reset System . Resetting them all
keeps the SpectraLink 8000 Telephony Gateways synchronized,
which is important for proper system functioning.
The SpectraLink 8000 Telephony Gateways are ready to operate. The
next step is to configure the lines used by the handsets. See the next
section: Telephone Line Configuration.
Note that after the handsets are added and the system is running,
additional configuration options may be chosen to adjust the system
for your usage situation.
PN: 1725-36028-001_T.doc 65