Omega Vehicle Security OMP-MODL - Manual (Page 154)

10... H YPER T RACK ™ R EAL -T IME D ATA D ISPLAY
U SING THE OMP-MODL 10-5
3. The OMP-MODL connection can then be disconnected
(eg to save long distance charges if connected via
modem) while the HyperTrack Net is developed.
Reading Probe Point icons from a Program Net on
disk:
If a copy of the Program Net that will be running in the OMP-MODL
during tracking is available on disk, this Program Net can be opened
from disk and the Probe Point icon information will be available for
HyperTrack Net development.
This method does not require establishing a serial link with the
OMP-MODL.
1. Switch to the HyperNet Window by clicking on the
HyperNet button.
2. Open the Program Net file
3. Switch to the HyperComm Window by clicking on the
HyperComm button, and a Probe Points icon should be
overlayed on the PC. (If the Probe Point icon is not
displayed, the Program Net selected does not contain
any Probe Point icons and a new Program Net should be
selected/developed.)
1. From within the HyperComm Window, click on the
HyperTrack button (or double click on the Probe Point
icon overlaying the PC) and the HyperTrack window will
appear with Probe Point icons displayed on the left edge
of the workspace. These icons represent the Probe Point
icons in the Program Net currently programmed in the
OMP-MODL’s memory.
2. Once this Probe Point icon information is displayed on
the workspace, it can be saved to a HyperTrack Net file
(the filename extension *.PRB will be appended) by
using the File/Save As drop-down menu selection. This
file can then be used as a starting point for development
of additional nets based on the same Program Net.
Note: The Program Net icon overlaying the PC in the
HyperComm Window represents the last Program Net
loaded from disk (in the HyperNet Window) or the last
Program Net downloaded from a serially connected
OMP-MODL. If the Program Net currently residing in the
PC contains Probe Point icons, then that icon will also
show overlaying the PC.
Building the HyperTrack Net
Icons
Three icons are available on the Icon Toolbar for use in construction
of the HyperTrack Net, a Math icon, a File icon, and the Real-Time
Scrolling Display icon.
Figure 10...
-6:
HyperTrack
button