Omega Vehicle Security OMP-MODL - Manual (Page 220)

11.. . A PPENDIX A: M ASTER I CON F ILE R EFERENCE
U SING T HE OMP-MODL 11-58
ICON CONFIGURATION DIALOG BOX:
CONFIGURATION OPTIONS:
Icon Name: Specify the label for the icon. This name will show directly under the icon
within the Program Net.
Input Name: In this box, HyperNet displays the Output Name of the icon connected to
this icon’s Input. The Output Name can be changed in the other icon’s
dialog.
Output after __ Samples: Specify the number of input readings to totalize before
outputting the sum of the input readings.
Output current Value upon disable: Check this box to force an output of the current
Sum Value at any time that the icon is disabled. If this box is not checked,
upon receipt of a disable signal, the Summation calculation will be
momentarily suspended until the icon is re-enabled and no in-process value
will be output.
For example, if a Sum is to be calculated over 10 samples but only 7 have
been analyzed and the icon is disabled, the 7 sample Summation Value will
be output and the Summing calculation will be suspended until re-enabled.
Upon re-enable, the summing will continue and after 3 more samples are
received, the 10 sample Summation Value will be output (unless the
following check box is checked)
Clear Sample Count and Sum upon Enable: Check this box to force a reset of the
Summation Value as well as the Sample count used used for the
calculation upon receipt of an Enable signal.
If this box is not checked, upon receipt of an Enable signal, the Summation
calculation will proceed from its suspended state (that it entered when it
was disabled).
Clear Sum after Output: Check this box to force the Sum Value to be reset to 0 after
Output. If this box is not checked, the icon will perform as a totalizer
Units: Provides a text box for User entry of a units label that will be shown at the
output from this icon.
Output Name: Specify the label for the Output. This name will show directly
under the Output terminal within the Program Net.