Omega Vehicle Security OMP-MODL - Manual (Page 85)

4... H YPER W ARE ™ S OFTWARE I NTRODUCTION
U SING T HE M ODU L OGGER 4-2
PC R EQUIREMENTS
To install and use HyperWare, the following minimum equipment is required:
♦
386 or higher IBM PC compatible
♦
4 Meg (minimum) of RAM memory
♦
Mouse or other pointing device
♦
Serial port for OMP-MODL connection (via Modem or RS-232
link)
♦
Microsoft Windows 3.1x, 95 or NT
♦
VGA display
♦
3 Meg of Hard disk space
♦
Windows supported / installed printer (optional)
H YPER W ARE I NSTALLATION
To install the HyperWare program onto your PC hard disk follow these steps:
1. Start Microsoft Windows.
2. Insert the HyperWare Program disk #1 into your floppy drive.
3. From the Program Manager's File menu, select Run, then type
a:install (or b:install) then <ENTER>
Windows 95 or NT users should select Run from the Start
button, then type a:install (or b:install) then <ENTER>
4. Follow the on screen directions for installing the software.
Dialogs prompting for User input will display during the
installation providing the opportunity to customize the
installation. For most Users, selecting the default responses to
the prompts will provide a fool-proof installation.
5. After installation, double-click on the new HyperWare icon (from
within the Program Manager) to launch the HyperWare
application.
U PGRADING H YPER W ARE TO A N EW V ERSION :
Instructions for upgrading HyperWare from a previous release are supplied with the
new upgrade diskette.