LumaSense Technologies INNOVA 1316A-1 - Manual (Page 43)

Chapter 3
_________________________________________________________________________________________
_____________________________________________________________________________
BE6020-14 1316A-1 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 43 of 98
Clear Soft Key
Using the Clear Soft Key the data is removed from the screen.
Comment Soft Key.
Activating the Comment Soft Key gives the opportunity to have a
text / comment stored in the log file on the PC’s Hard disk.
Figure 3.7. The BZ 6012 Main menu screen showing Time, Relative
time and Gas Concentrations for a 1316A-1 attached to COM port 3.
3.2.3 Gas Curves
To have a graphical presentation of the measurement data Select the
Screens pull down and select either Graphics1 or Graphics2.
Graphics1.
In the Graphics 1 mode the x-axis is a time axis.
The concentrations of all gases are presented using 2 y-axis. The
primary y-axis for CO
2
, CO and O
2
in a percentage (%) scale. And the
secondary y-axis to present measurement data for CH and NO in a
ppm scale. See figure 3.8 .