LumaSense Technologies INNOVA 1316A-1 - Manual (Page 61)

Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6020-14 1316A-1 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 61 of 98
The Proc In Progress in figure 4.3 is changed from a red In
Progress to a green Not in Progress in the status screen, see figure
4.5 .
Figure 4.5. Status Window showing Zero not required.
The 30-minute zero request interval timer is reset.
4.2.2 Error and Warnings Related to a Zero Calibration
The following conditions cause the Multi Gas Monitor –INNOVA 1316A-
1 to refuse to execute the zero calibration.
1. The Multi Gas Monitor –INNOVA 1316A-1 is in Start-Up mode,
see figure 4.6 , Operating Mode.