HP StorageWorks 2.32 Edge Switch - Manual (Page 139)

Edge Switch Element Manager user guide 139
3. When the dialog box appears confirming that the backup is complete, click OK. If the backup
fails, a dialog box appears to inform you that the backup to the HAFM appliance failed.
Restore Procedure
Use the following procedure to restore your product configuration:
1. Set the switch offline before performing the restore function.
2. Click Restore on the Backup and Restore Configuration dialog box to restore the
backed up configuration to the nonvolatile random access memory (NV-RAM) on the switch.
Note that the restore operation initiates an IPL. See ” Executing an IPL ” on page 135 for more
information about IPLs.
NOTE: Set the switch to offline before performing the restore function. If you click Restore and
the switch is online, a message dialog appears requesting that you turn the switch offline. No
action takes place when you close the dialog box. For instructions on setting the switch offline or
online, see ” Setting online state ” on page 136.
If the switch is already offline and you click Restore, a confirmation dialog box appears
indicating that the restore will overwrite any existing configuration already on the switch. The
dialog box also displays the date of the restored backup. Click OK.