HP StorageWorks 2.32 Edge Switch - Manual (Page 151)

Edge Switch Element Manager user guide 151
Open Systems Management Server
NOTE: Open Systems Management Server (OSMS) is available only for the Edge Switch 2/32.
OSMS is not available on the Edge Switch 2/24.
The Open System Management Server (OSMS) is a feature that allows host control and inband
management of the director or switch through a management application that resides on an
open-systems interconnection (OSI) device. This device is attached to a director or switch port. The
device communicates with the switch or director through Fibre Channel common transport (FC-CT)
protocol.
Configuring the Open Systems Management Server
Use these procedures to configure the Open Systems Inband Management program to function
with the switch.
To configure the Open Systems Management Server, use the following steps:
1. Select Configure > Management Server.
Two submenu options display, as shown in
step 2 and step 3 :
2. Click Enable the Open System Management Server. (To disable the open systems
management server, click the check box again to remove the check mark.)
3. Click Host Control Prohibited to display a check mark and prohibit the host management
program from changing configuration and connectivity parameters on the switch. In this case,
the host program has read-only access to configuration and connectivity parameters. Clicking
the check box when it contains a check mark removes the check mark and allows a host
program to change configuration and connectivity parameters on the switch.
4. Click Activate to implement changes and close the dialog box.
5. If you are finished configuring the switch, back up the configuration data. For more information,
see ” Backing up and restoring configuration ” on page 138.
SANtegrity features
SANtegrity includes a set of features that enhance security in SANs (Storage Area Networks) that
contain a large and mixed group of fabrics and attached devices. Through these features, you can
allow or prohibit switch attachment to fabrics and device attachment to switches. These features
are enabled by purchasing a feature key, then enabling the key through the Configure Feature Key
United Kingdom 00285 011D
France 00297 0129
International #5 00500 01F4
Table 6 Available code pages (continued)
Code page name Code page Hexadecimal CPGID