HP StorageWorks 2.32 Edge Switch User Manual

Page 193

Advertising
background image

Edge Switch Element Manager user guide 193

The switch must be offline to
configure.

A configuration changed was
attempted for a configuration
requiring offline changes.

Take the appropriate actions to set the
director or switch offline before attempting
the configuration change.

This feature is not installed. Please
contact your sales representative.

This feature has not been installed.

Contact your sales representative.

This feature key does not include all
of the features currently installed
and cannot be activated while the
switch is online.

The feature set currently installed for
this system contains features that are
not being installed with the new
feature key. To activate the new
feature key, you must set the switch
offline. Activating the new feature set,
however, will remove current features
not in the new feature set.

Set the switch offline through the Set
Online State dialog box, then activate the
new feature key using the Configure
Feature Key dialog box.

The new feature key will display both the
new features and the features that were
installed previously.

This feature key does not include all
of the features currently installed.
Do you want to continue with
feature key activation?

The feature set currently installed for
this system contains features that are
not being installed with the new
feature key.

Click Yes to activate the feature key and
remove current features not in the new
feature set or No to cancel.

Threshold alerts are not supported
on firmware earlier than 01.03.00.

Threshold alerts are not supported on
firmware earlier than 01.03.00.

Informational message.

Unable to change incompatible
firmware release.

You tried to download a firmware
release that is not compatible with the
current product configuration.

Refer to the product release notes or
contact the next level of support to report
the problem.

Unable to save data collection file
to destination.

The HAFM appliance could not save
the data collection file to the specified
location (PC hard drive, CD, or
network).

Retry the operation. If the condition
persists, contact the next level of support.

You do not have rights to perform
this action.

Configured user rights do not allow
this operation to be performed.

Verify user rights with the customer’s
network administrator and change as
required.

Table 8

Element Manager messages (continued)

Message

Description

Action

Advertising
This manual is related to the following products: