ITC IRMA TruPoint Blood Analysis System User Manual
Page 103
7.7
Patient ID
There are 3 patient ID options:
•
Off:
No patient ID information may be entered with a test.
•
Optional:
A patient ID may be entered when a test is run, but is not
required to be entered.
1. Highlight
Optional
button and press
next
.
2. Enter the minimum number of characters that must be entered if a patient
ID is entered (between 1 and 20 characters). Press
next
.
3. Enter the maximum number of characters that may be entered if a patient
ID is entered (between 1 and 20 characters). Press
next
.
•
Required:
Entry of a patient ID is required.
1. Highlight
Required
button and press
next
.
2. Enter the minimum number of characters that must be entered (between 1
and 20 characters). Press
next
.
3. Enter the maximum number of characters that may be entered (between 1
and 20 characters). Press
next
.
Patient temperature
There are 2 patient temperature options:
•
Off:
No patient temperature may be entered with a test.
•
On:
A patient temperature may be entered with a test, and temperature
corrected results will be reported.
Sample type/sample site
There are 2 sample type and sample site options:
•
Off:
No sample type or sample site information may be entered with a test.
•
On:
Sample type and/or sample site information may be entered with a
test.
Patient notes/QC notes
There are 2 patient notes and QC notes options:
•
Off:
No patient or QC notes may be entered with a test.
•
On:
Patient or QC notes may be entered with a test.