ITC IRMA TruPoint Blood Analysis System User Manual
Page 124
7.28
AUTO PRINT
There are 3 auto print options:
•
Off:
Test results do not automatically print upon completion of sample
analysis. A printout may be obtained by pressing the
button on the
Results screen.
•
Immediate:
Test results and sample information entered during the test will
automatically print upon completion of sample analysis.
•
Delayed:
Test results automatically print when the done button is pressed
from the Results screen.
1. Highlight the desired print format. Press
next
.
SCREEN CONTRAST
Screen contrast can be set to different levels for optimal viewing in different
ambient light conditions. The first level provides the least contrast between
the background and characters; the last level provides the greatest contrast
between the background and characters. Screen contrast changes immediately
upon pressing the selected contrast setting.
1. Use the left (<) and right (>) arrows to select
the optimal contrast setting. Press
next
.
VUELINK
VueLink is an optional module for the Philips/Agilent monitoring system that
allows IRMA TruPoint patient test results to be displayed on the
Philips/Agilent bedside monitor. There are two IRMA TruPoint VueLink
settings:
•
Off:
The IRMA TruPoint VueLink option is disabled. IRMA TruPoint
cannot send test results to the patient bedside monitor, even if it is
physically connected to a VueLink module.
•
On:
IRMA TruPoint results can be transferred to the patient bedside
monitoring system when connected to a VueLink module via the IRMA
TruPoint serial port.
1. Highlight the desired VueLink setting. Press
next
.