Industrial Data Systems IDS DT220 - Manual (Page 16)

DT220 Users Manual version 1.a Using the DT220
12
Scan ID’s
The display lists the ID keys in alphabetical order along with some additional field
values. Press the Cont. key to move down the ID list.
Display ID
The display prompts “Enter Nnnn ID:” where Nnnn is the data table name. Enter an ID
number then press the Enter key. The DT220 displays the ID’s data. Use the Cont. and
Review keys or the numeric keypad to move the pointer up or down to display all the
fields of the ID record that may not appear due to the 8 line display capacity.
Edit ID
The display prompts “Enter Nnnn ID:” where Nnnn is the data table name. Enter an ID
number then press the Enter key. The edit menu lists the record’s field names on the left
side of the screen and the field values on right side of the screen. Use the Cont. and
Review keys or the numeric keypad to move the pointer to a field that you want to edit
and then press the Enter key. The display prompts: Enter NNNN: VVVV where
NNNN is the field name and VVVV is the current value for the field. Enter a new value
for the field and press the Enter key to complete the entry. NOTE see the Configure
Parameters section of this manual for enabling and disabling the ability to edit tables and
registers.
Print ID
The display prompts “Enter Nnnn ID:” where Nnnn is the data table name. Enter an ID
number then press the Enter key. The information data for that ID record is sent to the
port that is configured as the printer port. All reports are in primary units.
Print ID Table Report & Reset Total, Subtotal & Count
This function is used to print all of the ID records in a table and the option to reset the
totals and counts for each ID within the table. All reports are in primary units.
The display prompts “Print Table ID n Report:” (where n is the data table number 1-6)
“Clear Totals (reg1) : N “
“Clear Subtot (reg2) : N “
“Clear Count (reg3) : N “ “Continue”
Press the Enter key to keep the data and move to the next selection or key in a Y and
Enter to clear the data for the weight totals, weight subtotals or the count for each ID
within the table. When “Continue” is highlighted press the Enter key to start printing the
table report. The report is printed to the port that is configured as the printer port.