Industrial Data Systems IDS DT220 - Manual (Page 48)

DT220 Users Manual version 1.a Specifications
44
DT220 Specifications
Display 8 lines x 40 char (240x64 graphics) LCD display.
Keyboard Sealed keyboard with tactile feel.
I/O Ports Load Cell Interface Port.
Serial Com port 1 - RS232 or Current Loop
Serial Com port 2 - RS232 or RS485 (Isolated)
Serial Com port 3 – RS232 or Current Loop (Isolated)
Parallel Printer port
8 TTL outputs.
7 TTL inputs.
Display Graduations 200,000 graduations (industrial)
10,000 hb44.
Display Increments 1, x2, x5, x10, x20, x50, x100.
Decimal Point 0 to 4 decimal places.
Internal Graduations 16,000,000.
Conversion Rate 60, 120, 240, or 480 samples/second
Signal Sensitivity 0.1 uV/graduation (min).
Signal Range 0.1 mV/V - 3.4 mV/V.
Load Cell Excitation 10 VDC (-5, +5 VDC).
Load Cell Current 240mA (8, 350 ohm Load Cells).
Auto Zero Tracking 0 to 60 grads, @1/4 grad increments.
Auto Zero Delay 0 to 25 sec, @0.1 sec increments.
Motion Detect 0 to 60 grads, @1/4 grad increments.
Motion Delay 0 to 25 sec, @0.1 sec increments.
Digital Filter 19 settings (0 to 18).
Digital Calibration Front Panel - zero & span stored in Flash memory
Power Input 115-240 VAC 50/60 Hz.
Operating Temperature -10 to 40 degrees centigrade.
Options Opto-22 relay modules.
Analog input module.
Analog output module.
Panel Mount Kit
Wall Mount Enclosures
EZLink 220 Programming/Development Kit