Daktronics Venus 1500 Ver 1.x - Manual (Page 57)

Communications 7-6
7.2.10 Run Schedule
Run Schedule starts running the schedule stored at the selected sign(s) and/or group of
signs. The Enable Brightness option turns the brightness for the sign(s) to scheduled
brightness levels.
=
m
Note: Scheduled messages will not appear on the sign until they are downloaded to
the sign site. The Get Status command will indicate the messages are running, but
nothing will display on the sign until the messages are downloaded.
7.2.11 Stop Schedule
Stop Schedule will stop the schedule running on the selected sign(s) and/or group of
signs.
7.2.12 Reset Sign
Use Reset Sign to reboot
the selected sign(s)
and/or group(s) of signs.
Clear Sign Memory will
remove all messages and
schedules stored within
the memory of the sign(s)
except the default
message.
Once a Reset Sign
command is executed,
the user should wait 8 to
10 seconds before
executing another
command.