LEICA SBP PRO 1 Lithium-Ion Battery for S Typ 007 (7.3V, 2300mAh) - Manual (Page 63)

EN
59
Tec
hnical dat
a
Focusing
Focus detection
Using phase detection method, in Live View mode on
the basis of contrast
Sensor / metering field One central cross sensor, defined by cross-
hair on the matt screen, in Live View mode the metering field can be
freely positioned
Operating modes Optionally AFs (single) = focus priority, AFc (contin-
uous) = shutter release priority, MF (manual), manual override of the
automatic setting possible at any time
Metered value storage By pressing the shutter button to the pressure
point, storage for 1 picture of permanently with Joystick
Autofocus drive In lenses
Viewfinder system
Eyepiece
High eyepoint viewfinder, diopter correction of -3 to +1dpt
possible at the viewfinder
Viewfinder field 98 %
Magnification 0.87x with 70 mm lens with setting to infinity and 0 dpt.
Focusing screens Interchangeable, standard equipment: Matt screen
with microprism ring and wedge
Displays
Viewfinder
LCD line under viewfinder image, illuminated, displays
Top panel Self-illuminating LCD
Monitor 3" color TFT LCD monitor with 16 million colors and 921,600
pixels, approx. 100% image field, max. 170° viewing angle, anti-reflex/
anti-soiling protective glass (Corning
® Gorilla Glas ® ), color space: sRGB
Live View mode Optionally with/without exposure simulation, spot
metering field can be moved in the whole image field, linked to also freely
movable AF metering field, display optionally with histogram and clipping,
marking of clearly focused subjects (focus peaking), grid lines and horizon
indicators, picture information
Video mode
Format, resolution, frame rate, color scanning
MOV (Motion JPEG),
optionally Full HD (1080 x 1920) with 24, 25 or 30 fps or 4K (2160 x
4096) with 24 fps, 4:2:2
Exposure control As for photos
Sound recording In 48 kHz / 16 bit stereo, optionally with internal or
external microphones, time code
Miscellaneous Display optionally with marking of clearly focused
subjects (focus peaking), external playback via HDMI socket: Full HD
video stream, 4K video recordings can only be stored on SD cards
Shutter and shutter release
Shutter
Selected with main switch, in camera: Microprocessor-con-
trolled, metal plate focal plane shutter with vertical movement, in appro-
priately configured Leica CS lenses: Central shutter
Shutter speeds Manual setting (with and ): 60 - 1 ⁄
4000
s in half steps
(60- 1 ⁄
1000
s with central shutter), B for long exposures up to maximum 60s,
flash synchronization up to 1 ⁄
125
s ( 1 ⁄
1000
s with central shutter).
Automatic setting (with and ): Steplessly from 60s to 1 ⁄
4000
s (60- 1 ⁄
1000
s
with central shutter),
Linear flashes with all faster shutter speeds than
1 ⁄
125
s possible (with
appropriately configured Leica system flash units and HSS-compatible
SCA 3002 standard flash units)
Series/interval shooting Picture series: approx. 3.5 pictures/s, max.
14 pictures in series with DNG, unlimited with JPEG, interval shooting:
Time until start, number of pictures and interval can be selected
Shutter button Two position: Activation of exposure and focus meter-
ing and metered value storage - shutter release
Self-times Delay time either 2 s or 12 s, indicated by flashing LED on
the front of the camera and corresponding display in the monitor
Mirror lock-up 1st pressure: Mirror is folded up, lens aperture is
closed to the set value, 2nd pressure: Shutter is released
Turning the camera on/off With main switch on camera top panel,
optionally auto power off after approx. 2/5/10 minutes
Power supply Rechargeable Li-Ion Battery, rated voltage 7.3 V, capac-
ity 2300 mAh, capacity display in top panel display; charge current /
voltage: DC 1250 mA / 7.4 V. Model number: BP-PRO1; Manufacturer:
PT. VARTA Microbattery Indonesia; Made in Indonesia, permanent power
supply possible using mains power pack (available as an accessory)
Lithium-Ion Battery Charger Quick Charger S; Inputs: 100-240 V AC,
50/60Hz, 200 mA, automatic switching, or 12/24 V DC, 1A; Output:
Nominal 7.4 V DC, 1250 mA / max. 8.25 V, 1265 mA Model number:
9C94270; Manufacturer: Ansmann; Made in China
GPS Optional (not available everywhere due to country-specific legisla-
tion, i.e. enforced automatic shutdown in those countries), data are
written to EXIF header in picture files
WLAN (802.11n-Standard), Integrated into camera, camera control and
picture monitoring possible with smartphone or tablet app
Horizon Metering with acceleration sensor, metering range: inclination
(about transverse axis) and tilt (about longitudinal axis) each ±90°, mea-
suring accuracy / display sensitivity: ≤1° at 0-40°C, display in monitor
Camera body
Material
All-metal die cast magnesium body with non-slip plastic
coating, top panel of magnesium, bottom cover of aluminum, bayonet of
stainless steel
Tripod thread A 1 ⁄
4
( 1 ⁄
4
") DIN and A 3 ⁄
8
( 3 ⁄
8
") DIN (steel inserts) each with
twist lock to DIN 4503, in metal tripod plate, under the center of the lens
axis
Operating conditions 0 to +45°C, 15%-80% relative humidity
Interfaces ISO accessory shoe with additional control contacts and
bore for locking pin, HDMI socket Type C, LEMO ® jack for data output
(USB 3.0 standard), 9-pin LEMO ® jack for remote control accessory/
remote flash trigger, audio out/in possible with audio adapter (available
as an accessory)
Dimensions (width x depth x height) approx. 160 x 80 x 120 mm
Weight approx. 1260 g (with battery)
Package contents Charger 100-240 V with integrated USA mains
plug, and interchangeable mains plugs (Euro, GB, AUS) and car charging
cable, lithium ion battery, carrying strap, bayonet cover, eyepiece cover,
image processing software: can be downloaded from the Leica Camera
AG website after registration of the camera
Subject to changes in design, production and availability.
Inhalt_EN.indd 59 12.10.2015 09:34:24