Lenovo ThinkStation P920 Tower Workstation User Manual
Page 107
Advertising
6. To remove an M.2 solid-state drive, do the following:
a. Loosen the screw that secures the M.2 solid-state drive
1
.
b. Remove the M.2 solid-state drive with the screw holder from the M.2 solid-state drive slot
2
.
c. Remove the screw holder from the M.2 solid-state drive
3
.
Figure 70. Removing the M.2 solid-state drive
7. To install an M.2 solid-state drive, do the following:
a. Align the notch
1
in the screw holder with the corresponding notch
2
in the M.2 solid-state drive.
Insert the screw holder onto the new M.2 solid-state drive as shown.
Figure 71. Inserting the screw holder onto the M.2 solid-state drive
.
Hardware removal and installation
95
Advertising