SkyTrak 6042 Service Manual - Manual (Page 137)

4.17 Model 6042 Legacy Origin 7/02
Cab and Covers
b. Loosen and remove the inner jam nut (Fig. 4-26, 3),
and remove the auxiliary hydraulics control cable
(4) from the bracket. Save the jam nut for
installation.
c. Route the cable through the opening at the
bottom of the frame.
Figure 4-26 Disconnect the Auxiliary Hydraulics Control
Cable at the Main Control Valve
7. Remove four button-head screws (Fig. 4-27, 1) and
remove the console panel (2).
8. Remove three hex-head capscrews (Fig. 4-28, 1)
three lockwashers and three flat washers.
9. Remove the auxiliary hydraulics joystick assembly
(Fig. 4-28, 2) from the vehicle.
b. Auxiliary Hydraulics Joystick Installation
1. Route the control cable through the opening at the
bottom of the cab.
2. Secure the auxiliary hydraulics joystick assembly
(Fig. 4-28, 2) to the cab console with three hex-head
capscrews (1) three lockwashers and three flat
washers.
Figure 4- 27 Remove the Joystick Access Panel
Figure 4- 28 Remove the Auxiliary Hydraulics
Joystick Assembly
1
MA8490
2
3
4
5
OH2430
1
2
~
1
MA8530
2
1