Lenze E84DSxxx - Manual (Page 550)

15 Parameter reference
15.2 Parameter list | C00456
550
Lenze · 8400 protec StateLine · Reference manual · DMS 4.2 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00456
C00458
C00461
C00462
Parameter | Name:
C00456 | Editor level
Data type: UNSIGNED_8
Index: 24119
d
= 5E37
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00458 | SYS_call table
Data type: UNSIGNED_16
Index: 24117
d
= 5E35
h
This code is for device-internal use only and must not be written to by the user!
Parameter | Name:
C00461 | Remote: Acceleration/deceleration time
Data type: UNSIGNED_32
Index: 24114
d
= 5E32
h
From version 06.00.00
 PC manual control
Setting range (min. value | unit | max. value)
0.000 s 999.999
Subcodes Lenze setting Info
C00461/1 2.000 s Remote: Acceleration/deceleration time
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1000
Parameter | Name:
C00462 | Remote: Control
Data type: UNSIGNED_16
Index: 24113
d
= 5E31
h
From version 06.00.00
 PC manual control
Setting range (min. value | unit | max. value)
0 65535
Subcodes Lenze setting Info
C00462/1 0 Remote: Control mode
C00462/2 0 Remote: Monitoring counter
 Read access  Write access  CINH  PLC STOP  No transfer  COM  MOT Scaling factor: 1