Great Plains Disk Harrow Update Gauge Wheel - Manual

08/23/2010 558-185M
Great Plains Manufacturing, Inc. 1
Disk Harrow Update
Gauge Wheel Update
General Information
These Instructions explain how to install the gauge wheel
kit update. These instructions apply to kit number: 558-
185A GAUGE WHEEL DISK UPDATE KIT. The gauge wheel will come completely assembled. The plates will
have to be welded on to wing frame.
MetaData: of <Safety Topics>Introduction
Tools Required
• Basic Hand Tools
• Torque Wrench
• Welder
Manual Update
Refer to the Disk Harrow operator’s manual for detailed
safety and maintaining of machine. Refer to parts man-
ual for part identification.
558-185A Kit
Assembly Instructions
Move machine to level ground, near a welder and unfold
wings. Remove old gauge wheel assemblies from wing frame. The old gauge wheel plates may stay on or may
be cut off.
Refer to Figure 1
1.
Center the 556-474D over the end of the outer tube
of the wing frame .
Refer to Figure 2
2. Position the plate as shown.
3. Weld the back side of the plate to the tube
556-100M Operator Manual
556-100P Parts Manual
Part Number Description Qty.
556-220K GAUGE WHEEL ASY RH 1
556-221K GAUGE WHEEL ASY LH 1
556-474D PLATE - TORCHED 2
821-001C
PAINT GP GREEN
SPRAY CAN
1
FigureSpacer:
Figure 1
Plate Assembly
41867
2
1
1
2
FigureSpacer:
Figure 2
Plate Location
41869