VXL Instruments Itona Md75 Series - Manual (Page 17)

Removing the Front Panel 13
8
Removing the Front Panel
1. Gently pull the bezel tabs outward on both the top and bottom strips simultaneously.
2. Push and remove the front bezel as shown in Figure 8-2.
3. Reverse the thin client to remove the side mask.
4. Unfasten the captive screw holding the Monitor Side VESA dock.
5. Slide and remove the Monitor Side VESA dock as shown in Figure 8-3.
Figure 8-1: Removing the Bezel Tabs
Figure 8-2: Removing the Front Bezel