VXL Instruments Itona Md75 Series - Manual (Page 26)

Replacing the Motherboard 22
12. Using the Philips screwdriver fix the motherboard using the four available screws.
13. Connect the cables into their respective slots. Refer to Figure 9-1 and Figure 9-2.
14. Replace the I/O Panel.
Note: When replacing the I/O panel, ensure that you place it in the grooves provided in
the chassis as shown in the following figure.
15. Using the Hot Glue Gun, apply glue to all the connectors.
16. For reassembly, follow the above instructions in the reverse order.