Removing the power adapter – VXL Instruments Itona Md75 Series User Manual
Page 7
Advertising
Removing the
Power Adapter
3
2
Removing the Power Adapter
1. Turn off the power supply to the client.
2. Remove the power cord from the power cord anchor.
Figure 2-1: Removing the Power Cord
3. Unfasten the captive screw holding the power adapter as shown in Figure 2-2.
Figure 2-2: Removing the Power Adapter
To replace the power adapter:
1. Use cable ties to route the new power adapter cable as shown in Figure 2-3.
Advertising