VXL Instruments Itona Md75 Series - Manual (Page 9)

Dismantling the VESA Dock 5
3
Dismantling the VESA Dock
1. Turn off the power supply to the client.
2. Remove all the cables connected to the client.
3. Unfasten the captive screw holding the Stand Side dock as shown in Figure 3-1.
4. Slide out the Monitor Side dock as shown in Figure 3-1.
Figure 3-1: Removing the Monitor Side Dock
5. Using the Philips Screwdriver, unscrew the four screws holding the Client Side dock and
the power adapter cradle as shown in Figure 3-2.
Figure 3-2: Removing the Client Side Dock
6. Remove and retain the dock and the power adapter cradle.
Note: Retain the screws for reassembly.
7. For reassembly, follow the above instructions in the reverse order.