VXL Instruments Itona Md75 Series - Manual (Page 19)

Removing the Front Panel 15
7. Remove the side mask as shown in Figure 8-5.
Figure 8-5: Removing the Side Mask
Note: Ensure that the position of the inlay card does not change when the client is
reassembled.
8. Apply isopropyl alcohol on the glue holding the cables; pull the glue out using nose pliers.
9. Unplug the cables.
10. Using the star screwdriver, unscrew the screw holding the Front Panel.
Figure 8-6: Unscrewing the Front Panel Screw