VXL Instruments Itona Md75 Series - Manual (Page 22)

Replacing the Motherboard 18
9
Replacing the Motherboard
1. Remove the power cord and top cover as described on page 5.
2. Remove the front bezel and the bottom side mask. Refer to the instructions 1 to 7 of
Removing the Front Panel.
3. Apply isopropyl alcohol on the glue holding the cables; pull the glue out using nose pliers.
s
Figure 9-1: Glue Holding the Cables
Figure 9-2: Removing the Speaker and the Front Panel Cables