H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 104

Advertising

[AC] local-user usera

[AC-luser-usera] group dot1x

[AC-luser-usera] password simple 1234

[AC-luser-usera] service-type lan-access

[AC-luser-usera] quit

# Configure the ISP domain to use local authentication and authorization.

[AC] domain mydomain

[AC-isp-mydomain] authentication lan-access local

[AC-isp-mydomain] authorization lan-access local

[AC-isp-mydomain] quit

# Configure an EAP profile, specifying to use EAP-MD5 for authentication.

[AC] eap-profile eapsvr

[AC-eap-prof-eapsvr] method md5

[AC-eap-prof-eapsvr] quit

# Configure the local EAP authentication server, specifying to use EAP profile eapsvr.

[AC] local-server authentication eap-profile eapsvr

# Enable port security globally.

[AC] port-security enable

# Specify the 802.1X authentication method.

[AC] dot1x authentication-method eap

# Create a WLAN interface and configure the port security mode as userLoginSecureExt.

[AC] interface wlan-ess 1

[AC-WLAN-ESS1] port-security port-mode userlogin-secure-ext

# Enable the key negotiation function for the port.

[AC-WLAN-ESS1] port-security tx-key-type 11key

# Disable the online user handshake function.

[AC-WLAN-ESS1] undo dot1x handshake

# Disable the 802.1X multicast trigger function.

[AC-WLAN-ESS1] undo dot1x multicast-trigger

# Configure the port to use mandatory authentication domain mydomain. Then, the AC will use the
authentication, authorization, and accounting methods of this domain for all users accessing this port.

This step is optional.

[AC-WLAN-ESS1] dot1x mandatory-domain mydomain

[AC-WLAN-ESS1] quit

# Create a WLAN service template, set the SSID to sectest, and bind the WLAN-ESS interface to the
service template.

[AC] wlan service-template 1 clear

[AC-wlan-st-1] ssid sectest

[AC-wlan-st-1] bind WLAN-ESS 1

[AC-wlan-st-1] authentication-method open-system

[AC-wlan-st-1] service-template enable

Verify the configuration

After the 802.1X user passes EAP authentication by using the username usera@mydomain and

password 1234 and logs in, execute the display connection command on the AC. You can see the user's

Advertising

This manual is related to the following products:

H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points H3C S10500 Series Switches H3C S5800 Series Switches H3C S5820X Series Switches H3C S12500 Series Switches H3C S9500E Series Switches H3C MSR 5600 H3C MSR 50 H3C MSR 3600 H3C MSR 30 H3C MSR 2600 H3C MSR 20-2X[40] H3C MSR 20-1X H3C MSR 930 H3C MSR 900 H3C SR8800 H3C SR6600-X H3C SR6600 H3C SecPath F5020 H3C SecPath F5040 H3C VMSG VFW1000