Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual

Page 249

Advertising
background image

235

[AC-wlan-ap-ap1-radio-1] radio enable

[AC-wlan-ap-ap1-radio-1] quit

[AC-wlan-ap-ap1] quit

Verifying the configuration

# Display the configuration information of the RADIUS scheme named radsun.

<AC> display radius scheme radsun

SchemeName : radsun

Index = 1 Type : standard

Primary Auth Server:

IP: 192.168.1.2 Port: 1812 State: active

Primary Acct Server:

IP: 192.168.1.3 Port: 1813 State: active

Second Auth Server:

IP: 192.168.1.3 Port: 1812 State: active

Second Acct Server:

IP: 192.168.1.2 Port: 1813 State: active

Auth Server Encryption Key : name

Acct Server Encryption Key : money

Accounting-On packet disable, send times = 5 , interval : 3s

Interval for timeout(second) : 5

Retransmission times for timeout : 5

Interval for realtime accounting(minute) : 15

Retransmission times of realtime-accounting packet : 5

Retransmission times of stop-accounting packet : 500

Quiet-interval(min) : 5

Username format : without-domain

Data flow unit : Byte

Packet unit : one

# Display the configuration information of the ISP domain named sun.

<AC> display domain sun

Domain = sun

State = Active

Access-limit = 30

Accounting method = Required

Default authentication scheme : radius=radsun

Default authorization scheme : radius=radsun

Default accounting scheme : radius=radsun

Domain User Template:

Idle-cut = Disable

Self-service = Disable

# Display the port security configuration information.

<AC> display port-security interface WLAN-ESS 1

Equipment port-security is enabled

Trap is disabled

Disableport Timeout: 20s

OUI value:

Index is 1, OUI value is 123401

Advertising