H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 223)

209
f. Click OK.
Figure 110 Adding a port group
5. Select User Access Manager > Service Parameters > Validate System Configuration from the
navigation tree to validate the configurations.
Configuring the AC
1. Configure a RADIUS scheme:
# Create RADIUS scheme rs1 and enter its view.
<AC> system-view
[AC] radius scheme rs1
# Configure the server type for the RADIUS scheme. When using the IMC server, you must
configure the RADIUS server type as extended.
[AC-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[AC-radius-rs1] primary authentication 192.168.0.112
[AC-radius-rs1] primary accounting 192.168.0.112
[AC-radius-rs1] key authentication radius
[AC-radius-rs1] key accounting radius
# Configure the access device to not carry the ISP domain name in the username sent to the
RADIUS server.
[AC-radius-rs1] user-name-format without-domain
[AC-radius-rs1] quit
2. Configure an authentication domain:
# Create ISP domain dm1 and enter its view.
[AC] domain dm1
# Configure AAA methods for the ISP domain.
[AC-isp-dm1] authentication portal radius-scheme rs1
[AC-isp-dm1] authorization portal radius-scheme rs1
[AC-isp-dm1] accounting portal radius-scheme rs1