HEIDENHAIN TNC 128 (77184x-02) - Manual (Page 348)

MOD functions
14.2 Graphic settings
14
348
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
14.2 Graphic settings
With the MOD function Graphic settings, you can select the model
type and model quality for the Test Run mode of operation.
Select the graphic settings:
In the MOD menu, select the
Graphic settings group
Select the model type
Select the model quality
Press the
Apply soft key
Press the
OK soft key
You have the following simulation parameters for the graphic settings:
Model type
Choice Properties Application Displayed
symbol
3-D Very true to detail,
heavy time and processor
consumption
Milling with undercuts,
2.5 D Fast Milling without undercuts
No model Very fast Line graphics
Model quality
Choice Properties Displayed
symbol
Very high High data transfer rate, exact depiction of tool geometry,
depiction of block end points and block numbers possible
High High data transfer rate, exact depiction of tool geometry
Medium Medium data transfer rate, approximation of tool geometry
Low Low data transfer rate, coarse approximation of tool geometry